Ultra Clear Bond

XCEL UCB is a transparent MS Polymer adhesive sealant. It’s designed for performance excellence, and is perfect for transparent applications. It has a high tensile strength of 22 kg per square centimetre. It’s 100% solvent free, odourless and environmentally friendly.

  • Permanently flexible

  • Resists Vibrations

  • Adheres to wet and dry surfaces

  • Suitable for indoors and outdoors

  • Paintable

  • ISEGA & HACCP Food Grade Certified

  • Odourless

  • High UV and Fungus resistance

  • Fast curing

  • Cures shrink free

  • High adhesive strength

Technical Information

Raw material basis: MS Polymer
Consistency: Non-slump paste
Specific gravity: approx. 1.05 g/ml
Skin forming time: 15 – 20 minutes (at 23ºC; 50% R.H.)
Curing rate: 4 mm/24 hr
Resistance to flow (ISO 7390): approx. 0 mm
Consumption: approx. 50 ml/ linear meter (nozzle diameter: 8mm)
Application temperature: Between 5ºC to 40 ºC
Properties of the cured product: (After one week at 23ºC and 50% R.H.)
Service temperature: -40ºC to +90ºC
Shore A hardness (ISO 868): 35
Modulus – elongation at 100% – (ISO 37): 0,8 Mpa.
Max. tensile (ISO 37): 1.7 MPa.
Elongation at break (ISO 37): > 150 %

These values may vary depending on environmental factors such as temperature, moisture, and type of substrates. The time until complete curing may be extended at lower temperature, lower humidity or increasing film thickness.

Check out our latest Videos