IGA 2018-05-29T19:38:33+01:00

Instant Grab Adhesive

XCEL IGA is an instant grab MS Polymer adhesive. It was developed for high strength initial bond. It fixes large panels and heavy objects without support or mechanical fixings, and has high tensile strength. It cures without shrinking, resists vibrations and remains flexible. It is available in 2 colours, grey and white.

  • Permanently flexible

  • Resists Vibrations

  • Adheres to wet and dry surfaces

  • Suitable for indoors and outdoors

  • Paintable

  • ISEGA & HACCP Food Grade Certified

  • Odourless

  • High UV and Fungus resistance

  • Fast curing

  • Cures shrink free

  • High adhesive strength

Technical Information

Raw material basis: MS Polymer
Consistency: Non-slump paste
Specific gravity: approx. 1.55 g/ml
Skin forming time: 5 – 10 minutes (at 23ºC; 50% R.H.)
Curing rate: 2-3 mm/24 hr
Resistance to flow (ISO 7390): approx. 0 mm
Consumption: approx. 50 ml/ linear meter (nozzle diameter: 8mm)
Application temperature: Between 5ºC to 40 ºC
Properties of the cured product: (After one week at 23ºC and 50% R.H.)
Service temperature: -40ºC to +90ºC
Shore A hardness (ISO 868): 65
Max. tensile (ISO 37): 2,50 MPa.
Modulus – elongation at 100% – (ISO 37): 1,70 Mpa. Max. tensile
Elongation at break (ISO 37): > 250 %

These values may vary depending on environmental factors such as temperature, moisture, and type of substrates. The time until complete curing may be extended at lower temperature, lower humidity or increasing film thickness.

IGA is available in 2 different colours, each tube has a unique “V” Cut Nozzle to control the flow of the product.

 IGA – White
  IGA- Grey

12 tubes per box

106 Boxes per skid

Check out our latest Videos

Where to Buy