MGA 2016-11-25T17:32:25+00:00

Masonry Grab Adhesive

XCEL MGA is a very high strength, high viscosity, one-part elastic adhesive for indoor and outdoor applications based on MS Polymer. Specially designed for fast and non-rigid structural bonding in construction, metal industry and masonry sector, with excellent adhesion to most substrates including brick, concrete, ceramics, marble, wood, melamine, aluminium and metals, and most plastics. Completely neutral and odourless curing.

  • Permanently flexible

  • Resists Vibrations

  • Adheres to wet and dry surfaces

  • Suitable for indoors and outdoors

  • Paintable

  • ISEGA & HACCP Food Grade Certified

  • Odourless

  • High UV and Fungus resistance

  • Fast curing

  • Cures shrink free

  • High adhesive strength

Technical Information

Raw material basis: MS Polymer
Consistency: Non-slump paste
Specific gravity: approx. 1.55 g/ml
Skin forming time: 15 – 20 minutes (at 23ºC; 50% R.H.)
Curing rate: 2-3 mm/24 hr
Resistance to flow (ISO 7390): approx. 0 mm
Consumption: approx. 50 ml/ linear meter (nozzle diameter: 8mm)
Application temperature: Between 5ºC to 40 ºC
Properties of the cured product: (After one week at 23ºC and 50% R.H.)
Service temperature: -40ºC to +90ºC
Shore A hardness (ISO 868): 65
Max. tensile (ISO 37): 2,50 MPa.
Elongation at break (ISO 37): > 250 %

These values may vary depending on environmental factors such as temperature, moisture, and type of substrates. The time until complete curing may be extended at lower temperature, lower humidity or increasing film thickness.

MGA is available in 2 different colours and can be manufactured in any other colour with a minimum qty of over 1272 tubes.

 

White  MGA – White
 Grey MGA- Grey

106 Boxes per skid

Check out our latest Videos

Where to Buy